Application rates & directions
Use one of three bases for feeding the roots: the per-plant amounts by growth stage, a soil test’s potash recommendation for a bed or field, or a potassium target for a nutrient solution. The label also gives a foliar direction. Weigh the product. The pepper amounts by growth stage update the single per-plant rate on packages printed with the April 2025 label; contact us with any questions.
Test first. Clemson Extension advises following a soil test to keep the soil pH for peppers between 6.0 and 6.5, and calls a soil test the best guide to a crop’s fertilizer needs. University of Minnesota Extension says most herbs grow best in well-drained soil at pH 6.0 to 7.5. For nutrient solutions, test your water for potassium, calcium, and magnesium before you mix.
Per plant, by growth stage
Peppers need more potash as they move from transplanting into flowering and fruiting, so Greenway’s amounts per plant rise with each stage: 1.5 g at transplanting, 3 g at first flowers, and 4 g every 4 to 6 weeks from fruit set through harvest. Keep feedings at least 4 weeks apart, even if your transplants were already flowering when you set them out. The weeks below follow the stages in the Mid-Atlantic pepper drip schedule and are approximate; Clemson Extension expects peppers to be ready for harvest about 70 to 85 days after transplanting. Weigh each dose on a pocket scale that reads to 0.1 g.
Garden peppers by growth stage: Greenway’s amounts of this product per plant, alongside Clemson Extension’s calcium nitrate sidedress, in approximate weeks after transplanting
| Growth stage | About when | This product | Calcium nitrate (nitrogen and calcium) |
| Seedlings in trays | Before transplanting | A feeding solution of 0.3 g per liter (1.1 g per US gallon), 2 to 3 times a week; halve it while hardening off | 0.43 g per liter (1.6 g per US gallon), dissolved separately into the same water, unless your seed-starting mix already contains fertilizer; halve it while hardening off |
| Transplanting and early vegetative growth | Weeks 0 to 2 | 1.5 g per plant, 4 to 6 inches from the plant, watered in | None yet |
| Late vegetative growth | Weeks 3 to 4 | None | ½ lb per 100 sq ft or per 30 ft of row, 3 to 4 weeks after planting |
| Early flowering | Weeks 5 to 6, at first flowers | 3 g per plant, at least 4 weeks after the transplanting feeding | None |
| Fruit set and development | Weeks 7 to 8 | 4 g per plant, about 4 weeks after the first-flower feeding | The same amount again, 3 to 4 weeks after the first sidedress |
| Harvest period | Week 9 onward | 4 g per plant every 4 to 6 weeks while plants keep fruiting, only as your soil test allows | More only if needed; the Mid-Atlantic recommendations allow a smaller, third nitrogen sidedress later in the season |
What each dose supplies. 1.5 g supplies 0.6 g of potash (K₂O), 0.17 g of phosphate (P₂O₅), and 0.17 g of nitrogen; 3 g supplies 1.2, 0.33, and 0.33 g; and 4 g supplies 1.6, 0.44, and 0.44 g. For 12 pepper plants that is 18 g at transplanting, 36 g at first flowers, and 48 g at each feeding from fruit set on.
Seedlings. Utah State University Extension gives 100 ppm of nitrogen, phosphorus, and potassium as suitable for most vegetable transplants, feeds pepper-family transplants two to three times a week, and halves the feed while hardening them off. Dosed to that 100 ppm of potassium, this product adds only 33 ppm nitrogen and about 15 ppm phosphorus, so add the calcium nitrate (it brings nitrogen to 100 ppm and adds 82 ppm calcium) unless your seed-starting mix already contains fertilizer. Dissolve each product separately into the water, and halve both while hardening off.
How Greenway set the pepper amounts. The Mid-Atlantic pepper drip schedule, which is for daily injection rather than single plants, raises potash after a preplant application from 0.5 lb per acre per day in early vegetative growth to 1.8 lb at harvest on coarse soils testing low to medium in potassium. Converted to one plant at Clemson Extension’s spacing (12 inches apart in rows 3 feet apart, about 14,500 plants per acre), that is about 1.3 g of product for the first 4 weeks, 2.7 g for weeks 5 to 8, and 3.9 g for each 4 weeks after, rounded to 1.5, 3, and 4 g. Four feedings total 12.5 g per plant, about 160 lb of potash per acre. For a season the Mid-Atlantic recommendations call for 200 lb of potash per acre for peppers on soil testing low in potassium, 150 on medium, 100 on high, and none on very high: on high-testing soil skip the later feedings, on very high soil do not use this product, and count any potash fertilizer worked in before planting. Packages printed with the April 2025 label give 3 g (1/2 teaspoon) per pepper plant every 4 to 6 weeks; these amounts update it and supply about the same potash over a season.
Herbs. The label gives 1.5 g (¼ teaspoon) per herb plant every 4 to 6 weeks through the growing season. Herbs have no fruiting stage, and University of Minnesota Extension advises feeding them lightly. Herbs a foot apart receive about 58 lb of potash per acre from each application; four would supply about 230 lb, more than the Mid-Atlantic recommendations give parsley even on low-potassium soil, so on soil testing medium or higher use fewer applications or size the bed by a soil test. Do the same for celery and parsnip, whose per-plant rate the label does not give, and for cilantro, dill, parsley, and other herbs sown thickly from seed.
No rate is given for plants growing on in containers of potting mix, other than the seedling feed above; email us before using it there. The weight of a teaspoon of this product has not been measured, so weigh every dose.
Placement. Clemson Extension advises placing sidedress fertilizer 4 to 6 inches from the plants to avoid burning the roots. Water it in afterward, and keep it off the leaves.
Beds and fields: size it by a soil test
Formula. Pounds of product = pounds of potash (K₂O) your soil test recommends ÷ 0.40. Multiply by 453.6 for grams. The Mid-Atlantic recommendations broadcast and disk in the season’s potash for peppers before planting, or supply it through a drip fertigation schedule.
University Extension potash (K₂O) recommendations for crops on this label, in pounds per acre for the whole season, by soil-test potassium level
| Source and crops | Low | Medium | High | Very high |
| Mid-Atlantic: peppers | 200 | 150 | 100 | 0 |
| Mid-Atlantic: parsley | 200 | 150 | 100 | 0 |
| Mid-Atlantic: celery | 250 | 150 | 100 | 0 |
| Mid-Atlantic: parsnips | 150 | 100 | 50 | 0 |
| UF/IFAS: pepper, parsley, and other vegetables in the same group | 120–150 | 100 | 0 | Not used (three levels) |
| UF/IFAS: celery | 150–250 | 100 | 0 | Not used (three levels) |
Weight of this 40% K₂O product that supplies a given potash recommendation
| K₂O recommended per acre | This product per acre | This product per 100 sq ft |
| 50 lb | 125 lb | 130 g (0.29 lb) |
| 100 lb | 250 lb | 260 g (0.57 lb) |
| 120 lb | 300 lb | 312 g (0.69 lb) |
| 150 lb | 375 lb | 390 g (0.86 lb) |
| 200 lb | 500 lb | 521 g (1.15 lb) |
| 250 lb | 625 lb | 651 g (1.43 lb) |
Mid-Atlantic figures are from the 2026/2027 Mid-Atlantic Commercial Vegetable Production Recommendations; UF/IFAS figures are from its Florida fertilizer-management chapter (CV296, Mehlich-3 soil test: low 35 ppm or less, medium 36 to 60, high above 60). Soil-test labs define low, medium, and high differently, so use the recommendation printed on your own report, and apply no more potash than it calls for. Each pound of potash from this product also brings 0.28 lb of phosphate and 0.28 lb of nitrogen; on soils high in phosphorus, a potash-only source avoids adding phosphate the soil does not need.
Through drip irrigation, by crop stage. Pounds of product = pounds of K₂O to inject ÷ 0.40. The Mid-Atlantic recommendations apply 25 to 50% of the season’s nitrogen and potash under the plastic mulch before planting, then inject the rest stage by stage:
Mid-Atlantic drip fertigation examples for peppers: weight of this product that supplies each stage’s potash (K₂O), per acre per day after the preplant application, by soil type
| Crop stage | Weeks | Coarse soil or under 2% organic matter, testing low to medium in potassium | Fine soil or over 2% organic matter, testing optimum or high in potassium |
| Preplant, under the mulch | Before planting | 250 lb per acre (100 lb K₂O) | 125 lb per acre (50 lb K₂O) |
| Early vegetative | 1–2 | 1.25 lb per day (0.5 lb K₂O) | 0.63 lb per day (0.25 lb K₂O) |
| Late vegetative | 3–4 | 1.75 lb per day (0.7 lb K₂O) | 0.88 lb per day (0.35 lb K₂O) |
| Early flowering | 5–6 | 2.5 lb per day (1.0 lb K₂O) | 1.25 lb per day (0.5 lb K₂O) |
| Fruit development | 7–8 | 3.75 lb per day (1.5 lb K₂O) | 1.88 lb per day (0.75 lb K₂O) |
| Harvest period | 9–14; continue through an extended harvest | 4.5 lb per day (1.8 lb K₂O) | 2.75 lb per day (1.1 lb K₂O) |
The schedule assumes 7,260 feet of bed per acre (beds 6 feet apart), so 1 lb of product per acre per day is about 6.2 g per 100 feet of bed per day: about 7.8 g in early vegetative growth and 28 g at harvest on the coarse, lower-potassium soil. The Mid-Atlantic recommendations say to base the overall rate on a soil test and to adjust it for other bed widths. UF/IFAS, for Florida peppers on soil testing low in potassium with no potash before planting, injects 1.5 lb of K₂O per acre per day in weeks 1 and 2 after transplanting, 2.0 in weeks 3 and 4, 2.5 in weeks 5 to 11, 2.0 in week 12, and 1.5 in week 13, or 3.75 to 6.25 lb of this product. Use one schedule, not both. This product supplies only 0.28 lb of nitrogen per pound of potash, so inject most of the nitrogen from another tank, such as calcium nitrate.
Nitrogen and calcium come from other fertilizers
Even at 4 g per plant, this product supplies only 0.44 g of nitrogen per pepper plant, while university recommendations call for 100 to 180 lb of nitrogen per acre for peppers (Mid-Atlantic) or 200 lb (UF/IFAS). In soil without drip, the Mid-Atlantic recommendations put the potash down before planting and split the nitrogen by stage: 50 lb per acre before planting, 50 lb after first fruit set, and 25 to 30 lb later if needed. For home-garden peppers, Clemson Extension sidedresses calcium nitrate at ½ lb per 100 sq ft or per 30 ft of row, 3 to 4 weeks after planting and again 3 to 4 weeks later, as the Calcium Nitrate page does, and notes that lots of foliage with few blooms and fruit shows too much nitrogen. Clemson also advises against over-fertilizing basil, because rapid growth reduces its flavor. For calcium in soil, lime to the pH your soil test calls for, or use gypsum where calcium is low and pH is on target; Clemson ties blossom-end rot in peppers to a calcium deficiency within the plant and advises keeping the soil uniformly moist, but not saturated.
Hydroponic solutions
Formula. Grams of product = (potassium target in ppm − potassium already in your water in ppm) × liters of final solution ÷ 332. Multiply US gallons by 3.785 to get liters. Dose it to the potassium target; calcium, magnesium, and most of the nitrogen come from other ingredients in a separate stock.
UF/IFAS grew bell peppers in composted pine bark under shade structures (HS368) on a solution that changes at first flower: 80 ppm nitrogen, 50 ppm phosphorus, 120 ppm potassium, 150 ppm calcium, and 40 ppm magnesium from transplant to first flower, and 130 ppm nitrogen, 50 ppm phosphorus, 200 ppm potassium, 150 ppm calcium, and 50 ppm magnesium after first flower. Dose this product to the potassium target for your plants’ stage, and switch at first flower.
This product dosed to each stage of the UF/IFAS shade-house pepper solution, from water with no potassium
| Dose and nutrients | Transplant to first flower | After first flower |
| Potassium target | 120 ppm | 200 ppm |
| This product per liter of final solution | 0.36 g | 0.60 g |
| This product per US gallon | 1.37 g | 2.28 g |
| Nitrogen it adds (solution target) | 40 ppm (80) | 66 ppm (130) |
| Phosphorus it adds (solution target) | 17 ppm (50) | 29 ppm (50) |
| Calcium and magnesium it adds (solution targets) | None (150 Ca, 40 Mg) | None (150 Ca, 50 Mg) |
After first flower, at 0.60 g per liter, this product supplies the following:
This product at 0.60 g per liter of final solution (200 ppm potassium), compared with the UF/IFAS shade-house pepper solution after first flower, in ppm (mg/L)
| Nutrient | From this product at 0.60 g/L | UF/IFAS pepper solution | Supply the difference with |
| Potassium (K) | 200 | 200 | Nothing further |
| Phosphorus (P) | 29 | 50 | A phosphorus source without potassium, if you want the full 50 |
| Nitrogen (N) | 66 (63 nitrate, 3 ammoniacal) | 130 | Calcium nitrate, in its own stock |
| Calcium (Ca) | 0 | 150 | Calcium nitrate, in its own stock |
| Magnesium (Mg) | 0 | 50 | Magnesium sulfate (Epsom salt) |
| Iron (Fe) | 3.0 | 2.8 | Nothing further |
| Manganese (Mn) | 1.2 | 0.8 | None; about 1.5 times the solution |
| Zinc (Zn) | 1.8 | 0.3 | None; about 6 times the solution |
| Boron (B) | 0.60 | 0.7 | Nothing further |
| Copper (Cu) | 0.30 | 0.2 | None; about 1.5 times the solution |
| Molybdenum (Mo) | 0.006 | 0.05 | Only if a water or tissue test calls for it |
Calcium and nitrogen. Calcium nitrate 15.5-0-0 adds 190 ppm calcium and 155 ppm nitrogen per gram per liter. Raising calcium to 150 ppm from water with 30 ppm takes 0.63 g per liter and brings total nitrogen to about 164 ppm after first flower, above the solution’s 130; from water with no calcium, 0.79 g per liter brings it to about 189 ppm. Before first flower, with potassium at 120 ppm, the same calcium brings nitrogen to about 138 ppm against 80. Calcium nitrate cannot add calcium without nitrogen; email us if you want to hold both targets. UF/IFAS keeps magnesium sulfate in the same stock as the premix, away from calcium nitrate; as Epsom salt (about 10% magnesium), 0.5 g per liter adds about 50 ppm.
Micronutrients and phosphorus. At this dose the product supplies about as much iron and boron as the UF/IFAS solution, about 1.5 times the manganese and copper, 6 times the zinc, one-eighth of the molybdenum, and three-fifths of the phosphorus. Do not add a micronutrient mix; add a micronutrient only if a water or tissue test calls for it. In a recirculating system, replace the solution on schedule rather than topping it up with this product, and email us if leaves show damage.
Potassium and calcium balance. UF/IFAS cautions that high potassium can interfere with a plant’s ability to absorb calcium and magnesium, and in its tomato work links excess potassium with blossom-end rot. Dose to your recipe’s potassium target rather than above it, and supply the calcium.
Separate stocks. Penn State Extension advises keeping calcium in a different stock tank from phosphates and sulfates, and UF/IFAS describes one tank of calcium nitrate and another of a premix without calcium. This product carries both phosphate and sulfate, so keep its concentrate apart from calcium nitrate or Cal-Mag.
Stock strength. The UF/IFAS tomato recipe dissolves 16 lb of premix plus 10 to 12 lb of magnesium sulfate in a 30-gallon tank for injection at 1:100: about 64 g of premix per liter, or 112 g per liter in all. A 1:100 stock of this product for 200 ppm potassium, from potassium-free water, is about 60 g per liter, or 110 g per liter with magnesium sulfate for 50 ppm magnesium. Dissolve it in warm water and check that nothing settles out; if it does, use a lower injector ratio, which makes a weaker stock (for example, 1:100 instead of 1:200).
pH, EC, and solution changes. UF/IFAS targets pH 5.8 to 6.2 in its hydroponic tomato guide, which it calls a suitable base for pepper solutions. Oklahoma State lists pH 5.5 to 6.0 and an EC of 0.8 to 1.8 mS/cm for hydroponic peppers, advises checking pH and EC daily, and replacing the solution every two weeks. For herbs it lists EC and pH of 1.0 to 1.6 and 5.5 to 6.0 for basil, 1.0 to 1.6 and 5.5 to 6.5 for sage, 1.8 to 2.2 and 6.0 to 6.5 for parsley, and 1.8 to 2.4 and 6.5 for celery. The UF/IFAS pepper table gives no EC, so track your own solution’s EC. Dose herbs to your own recipe’s potassium target; for basil, Cornell’s Neil Mattson recommends 40 to 60 ppm magnesium, as reported by the e-GRO program. These are guide figures, not the only correct values for every system.
Foliar sprays: the label direction
Foliar direction from the Pepper & Herb Fertilizer 11-11-40 package label, with the strongest mix under this page’s reading of it (at least 1 cup of water for each plant’s dose)
| Crop | Product per plant | Water per plant | Strongest mix | How often |
| Peppers | 575 mg (0.575 g) | At least 1 cup (240 mL) | 2.4 g per liter (9.2 g per US gallon) | Every 1 to 2 weeks |
| Herbs | 375 mg (0.375 g) | At least 1 cup (240 mL) | 1.6 g per liter (6.0 g per US gallon) | Every 1 to 2 weeks |
The label says to dissolve 575 mg per pepper plant or 375 mg per herb plant in water, and that you could use as little as 1 cup of water. This page reads that as at least 1 cup for each plant’s dose, the strongest mix the label describes. For 12 pepper plants, that is 6.9 g in at least 12 cups (0.75 gallon) of water. Use more water, never less, and try the spray on a few plants before a whole planting. Keep calcium concentrates out of the spray tank.
Extension sources treat foliar feeding as a supplement. University of Minnesota Extension notes that most nutrients are taken up through the roots, and the Mid-Atlantic recommendations say it is generally difficult to supply ample major and secondary nutrients through the leaves. Keep the soil or solution program as the main source.
Frequently asked questions
What does Pepper & Herb Fertilizer 11-11-40 contain?
It guarantees 11% nitrogen (10.5% nitrate, 0.5% ammoniacal), 11% available phosphate (P₂O₅), and 40% soluble potash (K₂O), plus 0.5% iron, 0.3% zinc, 0.2% manganese, and 0.05% copper, all chelated with EDTA, and 0.1% boron and 0.001% molybdenum. It contains no calcium or magnesium. Each pound supplies 181 g of potash, 50 g of phosphate, and 50 g of nitrogen.
How much should I use per plant?
For peppers, 1.5 g per plant at transplanting, 3 g at first flowers, and 4 g every 4 to 6 weeks from fruit set through harvest, keeping feedings at least 4 weeks apart; for herbs, 1.5 g per plant every 4 to 6 weeks. For 12 pepper plants that is 18 g, 36 g, and 48 g. Place it 4 to 6 inches from the plant and water it in. Packages printed with the April 2025 label give a single rate of 3 g per pepper plant; these stage amounts update it. Weigh the dose, because the weight of a teaspoon of this product has not been measured. No rate is given for plants growing on in containers of potting mix, other than the seedling feed, so email us before using it there.
How should I feed peppers through each growth stage?
Seedlings in trays: a feeding solution of 0.3 g per liter (1.1 g per US gallon), two to three times a week, with 0.43 g per liter of calcium nitrate dissolved separately into the same water for nitrogen unless the seed-starting mix already contains fertilizer; halve both while hardening off. At transplanting: 1.5 g per plant. At first flowers, at least 4 weeks later: 3 g. From fruit set, about 4 weeks after that: 4 g every 4 to 6 weeks through harvest, only as your soil test allows. In the garden, nitrogen comes from calcium nitrate: Clemson Extension sidedresses it 3 to 4 weeks after planting and again 3 to 4 weeks later. Greenway set these amounts from the rise in potash through the Mid-Atlantic pepper drip schedule, which this page also gives for drip systems; in hydroponics, the University of Florida IFAS pepper solution raises potassium from 120 ppm before first flower to 200 ppm after.
How much should I use on a garden bed or field?
Size it by a soil test: pounds of product equal the pounds of potash (K₂O) your test recommends, divided by 0.40, applied before planting and worked in. For example, 3 lb of potash per 1,000 sq ft on a 200 sq ft bed is 1.5 lb of product. For peppers, the Mid-Atlantic recommendations call for up to 200 lb of potash per acre on low-potassium soil and University of Florida IFAS up to 150 lb, less as the soil tests higher and none on the highest-testing soils. Use the figure on your own report.
Which crops can I use it on? Is it right for basil, cilantro, and parsley?
The label names Capsicums such as bell, sweet, chili, and guajillo peppers; umbellifers such as celery, dill, parsnip, coriander (cilantro), parsley, and fennel; and mint-family herbs such as basil, rosemary, peppermint, sage, thyme, and lavender. Basil, cilantro, and parsley are on that list, at 1.5 g per herb plant every 4 to 6 weeks; the label does not say which rate applies to celery and parsnip, so size those by a soil test. Herbs need little fertilizer: University of Minnesota Extension advises fertilizing lightly, because rich soils reduce essential-oil production and flavor. Because the product contains boron, the label warns that use on other crops can cause serious injury, and because it contains molybdenum, do not use it on forage or pasture. For a crop not on the label, email us first.
Do I still need a nitrogen fertilizer?
Yes, for peppers. This product supplies only 0.17 to 0.44 g of nitrogen per pepper plant per feeding, and university recommendations call for 100 to 200 lb of nitrogen per acre for peppers. For home-garden peppers, Clemson Extension sidedresses calcium nitrate at 1/2 lb per 100 square feet or per 30 feet of row, 3 to 4 weeks after planting and again 3 to 4 weeks later. Do not overdo it: Clemson notes that lots of foliage with few blooms and fruit shows over-fertilization with nitrogen. Herbs need far less.
How do I use it in a hydroponic system?
Dose it to your solution’s potassium target: grams = (target ppm K minus the K in your water) × liters of final solution ÷ 332. The University of Florida IFAS pepper solution raises potassium at first flower: 120 ppm from transplant to first flower is 0.36 g per liter, and 200 ppm after first flower is 0.60 g per liter, which also adds 66 ppm nitrogen and 29 ppm phosphorus. Supply calcium and most of the nitrogen with calcium nitrate in a separate stock tank, and magnesium with magnesium sulfate. Oklahoma State lists pH 5.5 to 6.0 and an EC of 0.8 to 1.8 mS/cm for hydroponic peppers. At the after-flower dose the product supplies about 6 times the zinc in the UF/IFAS solution, so do not add a micronutrient mix, and add any micronutrient only if a water or tissue test calls for it.
Can I spray it on the leaves?
Yes, as the label directs: dissolve 575 mg (0.575 g) per pepper plant or 375 mg per herb plant in water and apply every 1 to 2 weeks. The label says you could use as little as 1 cup of water; this page reads that as at least 1 cup for each plant’s dose, which is at most 2.4 g per liter for peppers and 1.6 g per liter for herbs. Use more water, never less, and try it on a few plants first. Extension sources treat foliar feeding as a supplement, because most nutrients are taken up through the roots.
Can I mix it with Cal-Mag or calcium nitrate?
Not as concentrates. Calcium reacts with the phosphate and sulfate in this product to form insoluble calcium phosphate and gypsum, which settle out and can clog emitters. Dissolve each product separately, keep them in different stock tanks, and dilute each into the final solution, where they can be used together. Then check the final solution for cloudiness, EC, and pH.
Will it make my peppers hotter?
No fertilizer can promise that. New Mexico State University explains that pepper heat results from the plant’s genetics and its interaction with the environment: temperature and water influence it, and a mild variety becomes hotter under any kind of stress in the field. None of the university sources used for this page says that potassium or any fertilizer makes peppers hotter. Choose the variety for the heat you want.
Will it prevent blossom-end rot?
No fertilizer can promise that, and this product contains no calcium. Blossom-end rot happens when too little calcium reaches the developing fruit. Clemson Extension advises keeping the soil uniformly moist, but not saturated, and the Mid-Atlantic recommendations advise proper soil calcium, nutrient balance, and uniform soil moisture. University of Florida IFAS cautions that high potassium can interfere with calcium uptake, so apply no more potash than your soil test calls for, and supply calcium separately.